The RobotSight Basic package is a bare-bones, but fully capable system intended for hobbyist and enthusiast comfortable electronics and/or firmware development.
RoboSight by RNIS offers an affordable, but powerful vision recognition system, ideal for robotic platforms and small embedded applications. Powered by the CogniMem CM-1K neural network chip by General-Vision, complex visual objects are readily detected and categorized from patterns previously trained by the user or the embedding system. The recognized visual categories can then be fed to the higher-level functions of the controlling system to guide goal decisions, object localization, platform movement and navigation, and environment manipulation.
Rather than require custom programming for each specific visual application, a simple train, then run cycle is all that is needed. Training is accomplished by issuing commands through the RoboSight serial interface. Once properly trained on a set of images (i.e. objects), the RoboSight, in Run Mode, is capable of recognizing these patterns. The current recognized category is available to be read over the serial interface.
Features:
* Powerful embedded CogniMem CM-1K neural network chip.
* OmniVision OV6630 camera, 352x288 resolution at 60 frames per second.
* Main Board PIC18F4260 µProcessor available for specific, user developed applications.
* On-board non-volatile memory to store trained pattern categories and configuration.
* RS-232 command-line interface for expanded features of RoboSight.
Includes:
* RoboSight Main Board
* OmniVision B&W Camera
* Open-Source Software and Firmware available for download
* On-line Documentation and Support Forums
* 30-day warranty
Requirements:
* 5 Volt regulated power supply (1A minimum)
* Serial RS232 Cable (with RoboSight Connector and DB9 Female)
* 2-wire Power&Ground cable
* Host Computer with RS232 Serial Terminal Capability
Recommended (not included):
* RCA Video cable and TV Monitor or Frame Grabber for viewing video
* CSS Mircochip PIC18F4620 compiler for user developed specific firmware applications
RoboSight by RNIS offers an affordable, but powerful vision recognition system, ideal for robotic platforms and small embedded applications. Powered by the CogniMem CM-1K neural network chip by General-Vision, complex visual objects are readily detected and categorized from patterns previously trained by the user or the embedding system. The recognized visual categories can then be fed to the higher-level functions of the controlling system to guide goal decisions, object localization, platform movement and navigation, and environment manipulation.
Rather than require custom programming for each specific visual application, a simple train, then run cycle is all that is needed. Training is accomplished by issuing commands through the RoboSight serial interface. Once properly trained on a set of images (i.e. objects), the RoboSight, in Run Mode, is capable of recognizing these patterns. The current recognized category is available to be read over the serial interface.
Features:
* Powerful embedded CogniMem CM-1K neural network chip.
* OmniVision OV6630 camera, 352x288 resolution at 60 frames per second.
* Main Board PIC18F4260 µProcessor available for specific, user developed applications.
* On-board non-volatile memory to store trained pattern categories and configuration.
* RS-232 command-line interface for expanded features of RoboSight.
Includes:
* RoboSight Main Board
* OmniVision B&W Camera
* Open-Source Software and Firmware available for download
* On-line Documentation and Support Forums
* 30-day warranty
Requirements:
* 5 Volt regulated power supply (1A minimum)
* Serial RS232 Cable (with RoboSight Connector and DB9 Female)
* 2-wire Power&Ground cable
* Host Computer with RS232 Serial Terminal Capability
Recommended (not included):
* RCA Video cable and TV Monitor or Frame Grabber for viewing video
* CSS Mircochip PIC18F4620 compiler for user developed specific firmware applications
You may also be interested in the following product(s)
|
RoboRealm
$ 89.00
|
| SKU | RN.RS.Bas |
| Shipping Weight in Pounds | 1.0000 |
| Manufacturer | RNIS |
| Model Number | RN.RS.Bas |
| Power | Run mode: 370mA @5VDC Train mode: 350mA @5vDC |
| Sensors | OmniVision OV6630 CMOS color sensor Note: RoboSight does not use the chrominance signal while processing the video for object categorization. |
| Size | 71mm x 56mm x 32mm |
| Package Contents | RoboSight Main Board, OmniVision B&W Camera, Open-Source Software and Firmware available for download, On-line Documentation and Support Forums, 30-day warranty |